Leaks can become a big and expensive problem if not addressed properly. Even a small leak can do some serious damage to your home. This includes rotting wood, increased water bills, warped floors and ceilings, and mould growth. By following expert advice you can prevent leaks and detect them early, saving both time and money.
7 Professional tips to detect leak repairs.
The following 7 tips will help you keep your home leak-free and prevent you from needing plumbing services in Melbourne.
Tip 1: Monitor Water Pressure
Both low as well as high water pressure can cause leaks. If water pressure seems weaker than it usually is, it could indicate a potential blockage or leak somewhere in the plumbing system. On the other hand, if water pressure is on the higher side, it can cause fixtures such as taps to leak. The ideal water pressure should be around 40-60 psi.
Tip 2: Slow Draining
If drains, sinks or showers drain slowly, it might be a signal you are in need of a blocked drain inspection. Poor sink maintenance can lead to clogged pipes. If you don’t clean the sink and pipe regularly, it can stop water from draining. Leading to still-standing water that could result in foul odours and disease-ridden germs. Learn the common causes of blocked drains and how to prevent them (blog 4)
Tip 3: Listen for Unusual Sounds
Unusual sounds can be an early indicator of leaks. Any gurgling, dripping or hissing or running water sounds when no water is being used, could be an indicator of a leak in your plumbing system. These sounds will be detectable near toilets, pipes and faucets. In any case you do hear anything unusual it is best to contact a professional plumber in Melbourne who can diagnose and fix the issues before they worsen.
Tip 4 Unusual High Water Bills
It is always wise to keep an eye on your water bill. A higher water bill can be a sign of a leak. Especially when you detect a sudden spike in water usage without any corresponding change in usage. In that case, check all toilets, faucets and appliances for leaks. A good indicator for a leak is when you read your water meter before and after two hours when no water is used. If anything changes in the water meter reading, you likely have a leak.
Tip 5 Use Quality Materials
Using subpar materials could increase the risk of leaks in your plumbing system. Always opt for high-quality pipes, fittings and sealants when repairing or installing new plumbing. It is best to consult with an expert about which material is best for your circumstance. This investment in quality materials is more costly upfront, but it could very well save you from costly repairs in the future.
Tip 6 Regular Inspections
Regular inspections are key to a healthy plumbing system. It is good to make it a habit to check areas that are prone to leaks. Such as pipes under sinks, around toilets and in basements. Refer to our checklist (link to blog 5 about the benefits of regular plumbing maintenance). of plumbing maintenance. It is advised to inspect your plumbing at least every 3 months. Look for signs of corrosion and moisture. When unsure what to look for, or aren’t positive what you’re looking for. The best option will always be to contact a professional plumber who is able to pinpoint any issues.
Tip 7 Know the Age of Your Plumbing
As with most things, older plumbing systems are more prone to leaks. Knowing the age of the plumbing in your home can prevent potential problems. If you moved into a new home or if your home has older pipes, consider having them checked in a home inspection by a professional plumber.
By following these expert tips, you can prevent and detect early leaks, saving you from costly plumbing repairs. Regular inspections are essential and using quality materials is a practical solution for a leak-free home. If you suspect a leak or need any assistance, don’t hesitate to contact a plumbing expert.